Super Dimensional Wizard - Chapter 172
Chapter 172
“What’s going on? Why did it explode all of a sudden?” With confusion, Angel reread the < Complete Book on Enchantment-Introduction >.
It was only in the middle of the reading that Angel got the answer from the author’s comments.
The original magic pattern drawn by an Alchemy Wizard is still different from a real magic pattern. Alchemy Wizards do not use a complete magic pattern for leather scrolls because the magic pattern they draw is used on alchemy tools. These magic patterns are mostly passive magic patterns.
For example: Sharpened Edge Magic Pattern, Armor-Piercing Magic Pattern, and so on… If drawn, will improve the Sharpened Edge strength and Armor-Piercing capabilities of an alchemy item. These are all passive effects.
Passive Effect Magic Patterns belongs to the high-end technology in magic patterns. Only Wizards, who are determined to learn about magic arrays will dabble in it.
Passive Effect Magic Patterns can achieve a long-term “enchantment” by combining with the appropriate alchemy material and having another energy source available. On the other hand, most ordinary magic pattern leather scrolls can only be used a few times. Only when it is transformed into a magic array can it be used for a long time.
Active Effect Enchantments are not absent from magic patterns, but all of them are composite… The so-called composite type. In fact does not belong to the enchantment magic pattern, but to enchantment magic arrays.
That is, the superposition of multiple magic patterns that construct magic arrays according to certain rules, and then enchantment on the alchemy item will produce an Active Effect Enchantment.
For example, the combination of Sharpened Edge Magic Pattern, Ejection Magic Pattern and Rain Magic Pattern will construct the magic array “Rain of Knives” enchantment effect.
Enchantment can give an alchemy item the active effect of “Rain of Knives” when it is applied to suitable materials for an alchemy item.
However, a magic array enchantment is too difficult. Even if it is studied in its entirety. The power is not much better than “blending.” Therefore, Alchemy Wizards tend to generally learn enchantment. But they only remember some low-level magic patterns and then transfers it directly to the “blending” stage of an item when the strength of the material is similar.
…
After reading about this subject. Angel can understand why the Sharpened Edge Magic Pattern leather scroll will end up broken up. Because the passive effects of the magic patterns are not what ordinary leather scrolls can bear at all. It belongs to the high-end knowledge of magic patterns and is the basis of magic arrays.
But Angel still feels happy.
Because at least he can see that the magic pattern he drew was successful. It means he can draw magic patterns and buy a true magic pattern book instead of buying some magic pattern leather scrolls. Maybe he can hit the top of Sky Tower by ripping magic pattern leather scrolls.
In the following week, Angel took the < Complete Book on Enchantment-Introduction > and became more proficient with magic patterns.
With his cheating through the holographic projection. Angel draws the other patterns more and more smoothly. Because of the holographic projection, every time he can draw the most standard magic pattern. This practice makes his drawings more perfect. Some of the magic patterns that he has drawn repeatedly. He can even directly get rid of… He can now achieve drawing the magic patterns freehand perfectly without the aid of the holographic projection.
As the Month of Flower passed, the first ten days of the Spring Festival came quietly.
Angel this day took out some materials, including Cold Star Gold, Ice Gel, Earth Demon Blood Copper, Iron Wood… To make it into parts one by one through the Heat Blend Art…
When he melted the Earth Demon Blood Copper. Angel uses Form Sculpt to make it into a half-crescent blade. After the shape is initially determined. Angel immediately depicts a Sharpened Edge Magic Pattern through the Holographic Tablet projection. He then uses the Condensation Art while taking out the artisan carving knife to carve beautiful waves onto the half-crescent blade at a fast speed.
He originally wanted to depict a viper engraving onto the 3D blueprint for the half-crescent blade. But the Heat Blend Art’s time is limited, and his magic power was somewhat exhausted. So he can only draw a few wavy lines at will as his artistic finish.
When the crescent blade was successfully placed on the experimental platform, it twinkled with an unimaginably sharp edge.
Angel wanted to take out several other parts to finish the assembly. Carefully he held the blade edge and unexpectedly directly cut his hand with the aura of Sharpened Edge with blood trickling out.
His bright red blood came across the crescent blade, but there was no contamination. The blood just went straight to the ground. This blood flow did not even stain the blade, it still looked as smooth as a mirror’s surface.
“This is not just a mortal blade. The flat edge has a Sharpened Edge effect. When the assembly is finished. It should be able to reach the standard level of an alchemy weapon, right?” Angel thought.
When the assembly process was soon over, and the finished product was held in the palm of Angel’s hand. It could be clearly seen as a sickle used by farmers to mow down grass.
The maximum length of the crescent blade is 31.2 cm. The maximum width is 13.7 cm, and the grip made of Iron Wood is 65.1 cm. On the whole, the sickle is not big, but its weight is appropriate to be held with one hand.
His craftsmanship is general. Although the edge has wavy lines, it is very simple. The handle is smooth and waxed, but it is also sparse and common.
As for the effect…
Angel came out of the lab with a sickle and crossed the river into the forest.
Angel wielded the sickle, pointed it at a fully grown maple tree and cut it down. The trunk roughly around the thickness of an adult waist was easily cut in two.
The sharpness has almost reached the peak sharpness for a blade.
Angel then wielded another cut, but this time he injected magic power into the sickle. With the injection of magic power, there was a slight flash on the edge of the crescent blade as Angel aimed at another maple tree.
The maple tree was still cut in two. But strangely, the cut cross-section was not as flat as cut tofu. Instead, it was full of all kinds of barbed cracks which Angel reckons was the result of the Sharpened Edge Magic Pattern.
Angel waved the blade a few more times, once even waving at only thin air. Before touching a branch, Angel cut off a section.
“Sure enough, this is beyond a mortal weapon.” Angel had a satisfied smile on his face.
The Sharpened Edge can easily cut off something without touching it. This is because of the effect of Sharpened Edge Magic Pattern!
The production of this item represents Angel’s formal entry into the threshold of Junior Alchemy Apprentice.
And it took him less than a month.
If other Alchemy Wizards knew about Angel’s achievements. They would be ashamed of themselves.
The vast majority of people who study alchemy take years to go from entry to junior apprentice. Every step of alchemy is extremely difficult, often taking many years to complete.
People like Angel can only be said to be born evil stars.
However, Angel himself has a little regret because he can only refine weapons with 3D blueprints. The other types, he has not had the time to dabble in yet.
…
When Angel returned home, he decided to make another alchemy weapon. When the weapon was completed, he began making his own weapon for climbing the tower.
Before refining the product, Angel’s mind flashed through the shadow of Nausica. At that time, the Will of the World’s arrival in the Mirror World caused a strong gale. This made him fall into a coma on the Falling Cloud Leaf Platform. Had it not been for Nausica’s timely rescue. He might have fallen off into the clouds and turned into a crushed meat patty fertilizer below at the Tree of Eternity.
So Angel decided to make an alchemy weapon for Nausica.
